Analysis of some technical terms about LED display

With the rapid development of LED display technology, it has been widely used in all walks of life, but for the novice, many of the technical terms of LED display are not understood, then what are the common terminology of LED display? What?

1. LED brightness: The brightness of the LED is generally expressed by Luminous-Intensity, the unit is candela cd; 1000ucd (micro-candela) = 1mcd (mound candela), 1000mcd = 1cd. The light intensity of a single LED for indoor use is generally 500ucd-50mcd, while the light intensity of a single LED for outdoor use should generally be 100mcd-1000mcd or even 1000mcd or more.

2, LED pixel module: LEDs are arranged in a matrix or pen segment, pre-made into a standard size module. The indoor display usually has 8*8 pixel modules and 8 words 7-segment digital modules. The outdoor display pixel module has specifications such as 4*4, 8*8, 8*16 pixels. The pixel module for the outdoor display screen is also referred to as a header bundle module because each pixel is composed of more than two LED tube bundles.

3. Pixel and Pixel Diameter: Each LED light-emitting unit (dot) that can be individually controlled in an LED display is called a pixel (or pixel). The pixel diameter ∮ refers to the diameter of each pixel in millimeters.

4. Resolution: The number of rows and columns of LED display pixels is called the resolution of the LED display. The resolution is the total number of pixels in the display, which determines the information capacity of a display.

5. Grayscale: Grayscale refers to the degree of brightness change of a pixel, and the grayscale of a primary color generally has 8 to 12 levels. For example, if the gray level of each primary color is 256 levels, for a dual primary color color screen, the display color is 256?256=64K color, which is also called the 256 color display screen.

6. Double primary color: Most color LED displays today are dual primary color screens, that is, each pixel has two LED dies: one for the red ray and one for the green dies. The pixel is red when the red die is lit, the green is green when the green die is lit, and the pixel is yellow when the red and green dies are simultaneously lit. Among them, red and green are called primary colors.

7, full color: red and green double primary color plus blue primary color, the three primary colors constitute full color. Since the technology for forming full-color blue tubes and pure green dies is now mature, the market is basically full-color.

Solar road light is a crystalline silicon solar battery power supply, valve control type sealed and maintenance-free battery, gel battery) to store electrical energy, super bright LED as light source, lamps and lanterns and controlled by the intelligent charging and discharging controller, is used to instead of the traditional public power lighting lamps.

Solar Street Light Battery

Solar road light working principle

1. Using the microcomputer intellective controller to transfer the light energy to electrical energy.Easy to install since to wiring and trenching,energy conservation and environmental protection.

2. The microcomputer intellective controller is composed by advanced special-purpose integrated circuit,high conversion efficiency,prevent over-load and over-discharge,Output short circuit protection,extend work life,on the safe side,convenient usage.

3. High effective Non-maintaining accumulator cell,strong storage,durable usage.

4. Automatic track type time controller,Automatically adjust the working time along with different illumination time in various seasons.For extending the work time energy conservation intellective controller with automatic shut-off the light at Deep-night.

Solar Street Light

 

 



Solar Street Light

Solar Street Light ,Solar Street Light Pole,Solar Street Light Battery,Solar Street Light Advantages

Jiangsu chengxu Electric Group Co., Ltd , https://www.satislighting.com