Cathy Group launches multimedia box active and passive component integration solution

ALCOR Micro introduces the Single Lun card reader& USB2.0 Hub-Reader Controller solution:

This article refers to the address: http://

Single Lun card reader:

1, SD spec up to v3.0 (SDXC), MMC spec up to v4.5 (HC-MMC)

2, External clock source selection

3, Built in Resonator (6465R)

USB2.0 Hub-Reader Controller:

Supports 1~3 downstream port.

Built-in 5V to 3.3V/1.8V regulator.

AME (Anmao Microelectronics) introduces LDO power solutions:

DC-DC BUCK Converter:

AME5248/5248A 1.5MHz, 600mA Synchronous Buck Converter

The AME5248/5248A is a 600mA pulse width modulation/pulse frequency modulation synchronous step-down DC-DC converter (PWM/PFM Synchronous Buck DC-DC Converter) with a low dropout of 100% duty cycle (Duty Cycle) Low Dropout) operation with a maximum efficiency of 95%. At very low loads, the AME5248/5248A automatically enters pulse frequency modulation (Pulse Frequency Modulation) to maintain output regulation, plus 20μA quiescent current and Enable Function to support power-saving mode, all of which extend the portable system Battery operating life. With a fixed switching frequency of 1.5MHz, it is possible to use smaller filter components in the design, making it ideal for thin and light portable devices.

AME5248/5248A provides a fixed output voltage (1.0~3.3V) and adjustable output voltage (AME5248 is 0.6V~VIN, AME5248A is 0.5V~VIN). The operating voltage is 2.5V~5.5V and the operating temperature is –40°C~125°C.

AME5252 Dual Synchronous, 600mA, 1.5MHz Step-Down DC/DC Converter

The AME5252 is a 600mA dual-output Synchronous Buck DC-DC Converter with higher performance and saves board space. The fixed 1.5MHz switching frequency can be used in design. The small filter unit is ideal for thin, portable and portable devices. The 2.5V to 5.5V input voltage range is suitable for single-lithium battery powered applications. The AME5252 operates in current mode with a 100% duty cycle (Duty Cycle) for low dropout, 96% high efficiency, operating temperature range of –40°C to 125°C, and built-in soft-start capability .

Low Dropout Voltage Regulator:

The internal components of the PMP will use many different LDOs to supply the required voltage and current for many of the AME's corresponding solutions. The AME8822 provides a fixed voltage of 1.2~3.3V, 250mA current output, quiescent current of about 30uA, low noise, high PSRR of 65dB, and provides Enable Function, allowing customers to choose Power-Saving Mode applications. The AME8818 has both fixed voltage and adjustable output. The output range is 1.2~4.5V, 300mA current output, PSRR is about 60dB, and the Enable & Bypass Function is provided, allowing customers to have Power-Saving Mode and low noise selection applications. The AME8805 provides a fixed voltage of 1.3 to 5.0V, a current output of 600mA, and a quiescent current of approximately 30uA. AME8815 is input 2.7~7V, fixed output voltage 1.5~5.0V, 1.5A current output, quiescent current is about 45uA.

AMOTECH offers a full range of ESD / EMI solutions:

ESD full range of solutions:

1. USB3.0, USB2.0 / eSATA2, eSATA3 / LAN / Antenna I/O AMOTECH ESD solution:

1. Product Name AIES12U 02 0R2

2, product specifications 0402, Contact discharge 8KV, Air discharge 15KV, 0.2pF

3, product characteristics ESD protection with very high speed interface.

Second, HDMI AMOTECH ESD solution:

1. Product Name AIES 12U 02 0R2 /AMES 12U 04Q 0R2

2, product specifications 0402, Contact discharge 8KV, Air discharge 15KV, 0.2pF

3, product characteristics ESD protection with very high speed interface.

Third, Digital Output AMOTECH ESD solution:

1. Product Name ADUC 10S 02 1R1 /AMES 12U 04Q 0R2

2, product specifications 0402, Contact discharge 8KV, Air discharge 15KV, 1.1Pf

3, product characteristics Ultra Low capacitance Chip Varistor .

4. A/V Output / TV, VCR (Scart) / RS232 AMOTECH ESD solution :

1. Product Name ADUC 30S 03 010

2, product specification 0603, Contact discharge 8KV, Air discharge 15KV, pF

3, product characteristics Ultra Low capacitance Chip Varistor .

EMI solution:

1. USB2.0 Amotech EMI solution (CMF)

1. Product Name ACFL 1A 2M 900E

2, product specifications 0504

3, product characteristics EMI solution for high speed differential transmission (Mbps)

Second, USB3.0 / HDMI Amotech EMI solution (CMF)

1. Product Name ACFT 4A 2G 120E

2, product specifications 0804,

3, product characteristics EMI solution for high speed differential transmission (Gbps)

Amotech provides excellent electrostatic protection. In addition to the general image transmission of RGB / D-SUB, it also provides measures including Single type and Array type in HDMI, USB 2.0 and USB 3.0. The maximum speed can support up to 8Gbps. And does not cause data distortion.

ASES12U020R2 1ch

ESD protection components can be used for high-speed transmission interfaces such as USB2.0, USB3.0, eSATA2, eSATA3, HDMI1.3 HDMI1.4, etc.

AMES12U04Q0R2 4ch

ESD protection component can be used for high speed transmission interface HDMI.

EUTECH introduces power and audio amplifier solutions:

Power solution:

LDO: EUP7907, EUP7962, EUP7963

Step-Up DC To DC (Boost): EUP2624A, EUP2627, EUP2410

DDR Termination: EUP7996, EUP7997, EUP7998

Lithium Battery Charger: EUP8075, EUP8207

Power Switch: EUP3545/A, EUP3546

Audio Amplifier Solution:

Audio amplifiers such as Class AB, Class D, and Class G. (Part specification information is available in the current product newsletter)

Everlight introduces Visible LED Components to solve LEDs solutions:

Visible LED Components products include the following products:

High Power LED

Low - Mid Power LED

SMD LEDs

Super Flux LEDs

LED Lamps

LED Digital Displays

Signage LEDs

Galtronics launches the Antenna Solutions solution:

Gary Electronics launched Antenna Solutions to provide cost-effective quality and high-performance customized products to help customers shorten the antenna design time. Gali Electronics has BT, WiFi, GPS, GSM, WCDMA, HSDPA, HSDPA-Plus, LTE ... and other related products for many years of design and development experience.

iDESYN (Yili Semiconductor) introduces MP3 power solution:

Nuvoton launches NCU501 personal media player solution:

Nuvoton introduces the NUC501, which will be designed for more complex applications. NUC501 is different from general microcontroller with embedded memory. Xintang Technology uses external SPI Flash, and this design can expand the memory, which is different from the 32-bit microcontroller that the previous manufacturer claims to be up to 1 US dollar. The memory is only 8KB. The read/write capacity is too small, but the NUC501 uses SPI Flash to achieve both expansion memory and low cost. This is also a recent important technology demonstration of Nuvoton Technology. Customers use PND GPS data records through high-capacity SPI. Flash for storage, SPI Flash can be used as data and program code storage, saving on the cost of client parts.

ㄧ, CPU:

1, ARM7TDMI @ 81MHz

2, 32KB high-speed SRAM

3, Extensible XIP @ SpiMemory

Second, Technology & Package:

0.18um CMOS, 2.8 ~ 3.3-volt single supply , Power current

RoHS-compliant package: LQFP-48 (NUC501AN), LQFP-64 (NUC501BN)

Third, Analog:

1, 8-ch 10-bit ADC

2, 16-bit Sigma-Delta mono DAC

3, LVD / LVR / MIC

4, 1.8V LDO for VDD core

Fourth, Peripherals:

1, SPI x 2, I2Cx1, UART x 2 (TXD, RXD, CTS, RTS)

2, 24-bit WDT, 4-ch PWM output

3, Capture & Compare PWM input x 8

4, Up to 37 programmable I/O (LQFP-64)

5, USB2.0 FS Device

6, Data write-back & content download @ SpiFlash

7, Embedded RTC with independent power

8, Direct sink LED (16mA) x 8

9, Crypto engine with OTP key for code security

Fifth, Operating current (All IP enable):

1, 24MHz: 10mA (1.8V) / 2.3mA (3.3V)

2, 48MHz: 18mA (1.8V) / 2.3mA (3.3V)

3, 72MHz: 23mA (1.8V) / 2.3mA (3.3V)

4, 81MHz: 26mA (1.8V) / 2.3mA (3.3V)

6. Power down current:

1, VDD33: around 0.5uA

2, Core 1.8V: under 50Ua

Development Environment:

SiTime introduces the MEMS technology SiT8103 series to solve the 1-110 MHz Oscillator solution:

1, 1-110 MHz frequency range

2, Frequency stability as low as ±20 ppm

3, LVCMOS / LVTTL compatible output

4, Typical current consumption of 6.1 mA in active mode

5, Standby or output enable modes

6, Four industry-standard packages: 2.5 x 2.0, 3.2 x 2.5, 5.0 x 3.2, 7.0 x 5.0 mm

7. All-silicon device with outstanding reliability of 2 FIT, 10x improvement over quartz-based devices, enhancing system MTBF

8. Outstanding mechanical robustness for portable applications

9, Ultra short lead time

10, Ideal for consumer electronics, video, graphics card, set top boxes, HDTV, DVR, scanners, printers, copiers, IP camera, etc.

11. Ideal for high-speed serial protocols such as: USB 1.1, USB 2.0, SATA, SAS, Fibre Channel, Firewire, Ethernet, PCI Express, etc.

TROQ (Chuangjie Electronics) launched the Crystal solution:

ViKing introduces the best solution for resistors and inductors:

Winbond (Winbond) introduces the best solution for Memory:

Winbond Specialty DRAM Strategy

Focus on Non-PC Main Memory

_ Winbond runs “zero” PC main DRAM Biz with Winbond Branded products

_ Over 75% of W/W DRAM demand is from PC main memory

_ Long-term support with stable supply and the most advance technology

_ Complete Specialty DRAM Solution Provider

_ Density : 16~256M SDR, 64~256M DDR, 128M~1G DDR2

_ Speed ​​: Up to 200MHz for SDR, 250MHz for DDR1, 533MHz for DDR2

_ I-temp Support with all 90nm SDR/DDR products

_ x16 / x32 ; 1.8V support for SDR/DDR

_ Support BGA (60/90/144 ball) Package

_ Support KGD business with RDL solution

_ (Many Successful Stories)

_ To Expand Market Share of Specialty DRAM aggressively

Winbond Flash Memory Strategy

Winbond is well positioned for Serial Flash Market growth

Primary focus and market advantage is Serial Flash

Wide range of SpiFlash® Memories (1Mb to 128Mb)

Superiorfeatures, Industry's highest performance

First to introduce Dual and Quad Serial Flash

Complimentary Parallel Flash Memories

Spansion compatible (16Mb to 32Mb)

Strong Manufacturing Resources

Competitive cost, new 90nm Technology

In-house test, Known Good Die (KGD) capability

Ample wafer capacity

SpiFlash® W25Q Quad-SPI Family

Next Generation Serial Flash

Introduced in Aug 2007

Worlds First Quad SPI Serial Flash

25Q16 and 25Q32 in 130nm technology

SPI, Dual-SPI and Quad-SPI

Uniform 4KB, 32KB & 64KB erase

Industry's Highest Performance

80MHz clock, 320MHz equiv. with Quad-SPI (40MB/S)

>6X the performance of most Serial Flash,

Execute code from SPI (XIP) or Faster Boot-up (Code Shadow)

Security and other Features

Lock-down & OTP write protect, 64-bit ID# (special order)

Erase suspend/resume, Quad ProgrammingB

New SpiFlash® W25Q “B” Series

Winbond's next generation SpiFlash family

W25Q16B and W25Q64B are first in a family of 1M to 128M-bit

Single, Dual and Quad SPI interface in one device

Advanced 90nm Winbond Technology and Features

First Serial Flash supplier with 90nm from 12” fab

Packaging: First 64M-bit to fit in low-cost 8-pin SO package

Performance: 104MHz Quad-SPI is industry highest

Programming: 100% faster (reduces customer test time and application updates)

Voltage Options: 3.3V, 2.5V and 1.8V operation

New Features: Erase/Write-Suspend/Resume, OTP Security, Burst-with-Wrap

Compatibility: Use for existing SPI, as well as new Dual and Quad SPI designs

Page 17

W19B Parallel Flash Family

16Mb & 32Mb Densities

2.7~3.6 Volt, x8/x16

70 ns Access Time

Single Bank Architecture

Top or Bottom Boot Block

48-Pin TSOP (12x20mm) Package

Compatible with:

Spansion-29 series

MXIC-29 series

STM-29 series

Atmel-49 series

SST-39 series

This battery is for replacing Lead-Acid Battery, it has the standard appearance and size as well as capacity, but longer cycle life and high energy and good charge and discharge performance.

Capacity:100AH/150AH/180AH/200AH/250AH. 

Voltage:12.8V, cycle life is more than 2000 times, also can customize the capacity.

Lead-Acid Replacement Battery(LiFePo4)

Lead-Acid Battery,Lead-Acid Replacement Battery,Lifepo4 Lead Acid Replacement,Lead-Acid Replacement Battery(Lifepo4),12 Volt Battery Backup,Renewable Energy Bank

Shenzhen Enershare Technology Co.,Ltd , https://www.enersharepower.com