Zhongzhao Lighting Award Lighting Engineering Design Award (outdoor/block, single) third prize Project Name: First Steel City Architectural Lighting Reporting unit: Shanghai Tongjing Lighting Appliance Co., Ltd. Shanghai Guanglian Lighting Technology Co., Ltd. Project Description First Steel City is located at No. 8, Luan Road, Zhonghuan Road, Yangpu District, the landmark building of the Dabaishu Steel Trade Circle. It is only 1 km away from Wujiaochang, one of the five sub-centers of the city. The building is 63.4 meters high, with a total floor area of ​​17 floors and 15 floors above ground, with a total area of ​​about 35,000 square meters. First Steel City Architectural Lighting Project, completed by Shanghai Tongjing Environmental Lighting Art Design Co., Ltd., Shanghai Tongjing Lighting Appliance Co., Ltd. completed lighting project construction and service, LED landscape lighting and LED lighting control system from Shanghai Light Lian Lighting Technology Co., Ltd. supply. Innovations in lighting design concepts, methods, etc.: The main performance of the design concept 1) Visual effects - Shang Shan Ruo Shui The water is soft and the steel is strong, the water is good and everything is not disputed, and the iron is refined into steel. The toughness of water and the strength of steel are the important spiritual bodies of the development of the first steel market. Through the expression of water, the elegant and beautiful lighting of the building is reflected. 2) Dynamic effect - quiet yoga LEDs give more variation to the lighting, but the lighting dynamics are not necessarily rich in beauty, and the complexity is beautiful. The dynamics of the lighting should be like a breath-like charm, such as yoga-like elegance. In the dynamics of lighting, we pay attention to the expression of breathing, pay attention to the display of charm, if the lights of the first steel market shine in the ordinary, there is a leading industry in the quiet! Innovation 1) Multi-directional control of brightness a) Overall brightness control of the building In the overall brightness control of the building, we carry out a soft transition, not a single light and dark relationship. b) brightness control of each facade The southwestern surface is the main light performance "yang" surface, its brightness value is relatively high, and the northeastern northeast is the main light performance "yin" surface, which controls the lower brightness. c) brightness control of the structure in the facade The honeycomb structure of the inner and outer rings of the façade is an important performance feature of the building. We also use different brightness ratios of the inner and outer rings to reflect the "inner yin and yang" lighting performance, making the lights on the night façade more abundant. Hierarchical relationship. 2) Color control Considering the environmental factors of the building, the color of the light should not be too messy, but it can't be changed. So we chose the blue color as the main color of the building, through the subtle color transition and light and dark of the blue. Change, in a hue, gives the steel building a rich rhythmic color change. Only the gradient of the same color, we pursue more emotional performance... 3) Dynamic control The entire building has a total of 120,000 pixels. We use DMX512 control for point-by-point control. See the "Steel Trading Building System Schematic" for the control system. Cosmetic Instrument Vibration Motor Mainly used in cosmetic instrument, such as instrument, cleansing essence introducing vibration meter, wash a face, facial massage, hairdressing instrument, etc.
Operating temperature range:
Cosmetic Instrument Vibration Motor should be used at a temperature of -10~60℃.
The figures stated in the catalog specifications are based on use at ordinary room temperature catalog specifications re based on use at ordinary room temperature (approximately20~25℃.
If a Cosmetic Instrument Vibration Motoris used outside the prescribed temperature range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.Depending on the temperature conditions ,it may be possible to deal with them by changing the grease of the motor's parts.Please feel free to consult with us about this.
Storage temperature range:
Cosmetic Instrument Vibration Motor should be stored ta a temperature of -15~65℃.
In case of storage outside this range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.
Service life:
â—Use with a load that exceeds the rated torque
â—Frequent starting
â—Momentary reversals of turning direction
â—Impact loads
â—Long-term continuous operation
â—Forced turning using the output shaft
â—Use in which the permitted overhang load or the permitted thrust load is exceeded
â—A pulse drive ,e.g.,a short break,counter electromotive force,PWM control
â—Use of a voltage that is nonstandard as regards the rated voltage
â—Use outside the prescribed temperature or relative-humidity range,or in a special environment.
â—Please consult with us about these or any other conditions of use that may apply,so that we can be sure that you select the most appropriate model.
when it come to volume production,we're a major player as well .each month,we rurn out 600000 units,all of which are compliant with the rohs directive.Have any questions or special needed, please contact us, we have the engineer group and best sales department to service to you Looking forward to your inquiry. Welcome to our factory.
Cosmetic Instrument Vibration Motor Cosmetic Instrument Vibration Motor,Face Brush Vibration Motor,Electric Cosmetic Instrument Vibration Motor,Cosmetic Instrument Mini Vibration Motor Shenzhen Shunchang Motor Co., LTD. , https://www.scgearmotor.com