Civil LED flashlight requirements and choices

LED flashlights are only used in special industrial applications. With the low production cost of products, the unit price of products is also reduced. Similarly, Volkswagen also flashes ordinary flashlights due to the rechargeable, high-strength and durability of LED flashlights. What is the requirement?

The basic requirements of household LED glare flashlight: practical, cost-effective, quiet operation, moderate brightness, convenient or easy to maintain and replace the battery; carry a strong light flashlight with the basic requirements: small shape, simple, moderate brightness, good character, and comfortable operation If it is the use of Mies, it is best to have a certain self-defense effect, such as flashing, etc., recommend mini; car flashlight requires: quiet hammer effect, high brightness, rich effect (such as SOS effect), long battery life, It is best to have the car charging effect, and in the dark underground garage, it should also have a certain protective effect; hit the lamp head plan, when the distressed window is out of control, you can easily crush the tempered glass, so that you get a glimmer of hope.

LED flashlights require: the choice of the case of the difference between the credentials, the difference between the situation and the requirements of the enemy's power is not the same, initiated to explain to the seller at the time of purchase. There are also many classifications, such as: night riding flashlights, hunting flashlights, patrols, and patrol flashlights.

Business gift LED flashlights must be exquisitely packaged, stable and reliable. The number of heads is moderate. The same as the household is usually not over 12 heads, the battery used in plastic flashlights is good in 2 to 3 knots, and a little more waves, for other special needs can be determined by the necessity itself.

What should you pay attention to when choosing an LED flashlight?

1. Fine waterproof. Since it belongs to the electronic product, there is a circuit board at the front of the flashlight, which is easy to cause a short circuit when it enters the water, causing damage.

2. Soldering should be strong. Each diode of the glare flashlight is connected to the circuit board by soldering. If there is a weak solder snoring, it may cause the bead to be off or affect the group.

3. The power switch should be noticeable. This type of flashlight accepts the rotary switch. It is tightened and then turned off. If the snoring is not obvious, it is easy to cause signs of light and time.

4. The number of heads is moderate. The same as the household, usually do not over 12, the battery used in the flashlight is good in 2 to 3 knots, and then a little bit of a wave, for other special needs can be determined by the necessity itself. The electric bead concentrating surface only meets a little.

Ceiling Lamp

Led Ceiling Lamp,Modern Ceiling Lamps,Led Recessed Ceiling Lights,Remote Control Ceiling Lights

Changxing Fanya Lighting Co.,Ltd , https://www.fyledlights.com