Tencent Digital (Blue) Huawei P10 has been frequently exposed on the Internet recently. After the news that there will be a dual-screen version, another foreign website Playfuldroid released the rendering of two models of the Huawei P10 series for the first time. Not only confirmed that the aircraft does have two versions of the straight screen and double-curtain screen, but also double-lens aperture of the Leica technology will increase to F2.0, while the double-curtain version also seems to use a double fingerprint unlock design before and after, which in the past Leaked Huawei Mate 9 Pro has appeared in renderings. Rendering exposure The Huawei P10 rendering of the exposure of this foreign website is said to have come from China, and confirmed that there will be two versions of the straight screen and double-curtain screen. From the perspective of the overall appearance of the mobile phone, the direct-screen version does not seem to change much from the front of the Huawei P10. The main difference is that it uses a pre-fingerprint identification design, and it is said that it will use similar ultrasonic fingerprinting technology. As for the first-to-surface hyperbolic screen version, no accident will be named Huawei P10 Plus, and looks somewhat similar to the Samsung S7 edge in appearance, but the more special place is the use of dual fingerprint identification design. Not only does it have a long Home button on the front of the phone, but also a circular fingerprint sensor is located underneath the camera. This has also been seen in the renderings of Huawei Mate 9 Pro before its release. Lens aperture increases It should be noted that the original dual-fingerprint design of Huawei Mate 9 Pro may be one of the original designs. According to sources, it seems that it was later cancelled before it was released. Therefore, it is not surprising that the design of dual-fingerprints on Huawei's double-curvature screen also appears. As to whether it will be retained in the end, there is no clear news yet. In addition, from the perspective of the leaked renderings, at least the double-screen Huawei P10 Plus dual camera will change in the shape, especially the flash part into a circular design, while the dual camera lens focal length No change has occurred, but the lens aperture has increased by F2.0 from F2.2 in the past, and it will be more handy for taking photos under low light conditions. Kirin 960 processor Although it is not yet possible to determine the authenticity of the leaked Huawei P10 series renderings, from the information disclosed by the source in the past, even if the official version will have slight differences in appearance in the future, it should not change much. However, there is no information on Huawei's P10-related specifications. It is expected that there will be no suspense when it comes to the Unicorn 960 processor. At the same time, the hyperbolic version is rumored to be equipped with a 5.5-inch 2K display and 16 million dual cameras. Since it is a heavy product launched in the first quarter of next year, Huawei's P10 series of memory starts with 4GB, has 32GB/64GB of storage capacity, and will increase 6GB of memory and 128GB of storage capacity version should not have any problems. In addition, the aircraft may also be innovative in fingerprint recognition technology, does not rule out the possibility of glass fingerprint recognition capabilities. As for the release time of the Huawei P10 series, it is expected that it will be around April next year.
Solar sensor lights use solar panels to charge the rechargeable battery. When there is enough light, the solar panel generates current and voltage to charge the battery. Night by intelligent infrared and light control switch to control the battery output power to the load. Mainly used for road lighting, yurt, tents, gardens, yars, parks and other outdoor lighting.
Solar Panel:5.5V,150mA,Poly-crystalline
Battery:rechargeable Lithium battery,3.7V,2200mAh*1
LED Lamp: 8LEDx0.066W/Epistar Chip
LED Luminous:7Lumen/LED
LED Color Temperature:Cool White:5500-6000K;
Lamp Luminous Flux: 45LM
Material:ABS
Operation: PIR motion sensor
Cable Length: all in one,no cable
Working Time:The motion sensor will keep the light On as long as there is movement.If there is no movement, the light will switch off after 35 seconds.
Charging Time:empty battery needs 12hours to get full Charged
Sensor area: 5m and 60 degree angle
Warranty: 1 Year
Application:Roof Lighting,such as portable toilet
Install: Easy to install,simply to cut a hole 50mm in a diameter in roofing,Unscrew clear lens and black nut from the unit.Leave the silicon O-ring in place.Switch light on by fully depressing white switch on bottom, then light should stay on.Insert light through hole and screw the holding plate and clear light cover back on.Once in place,light will automatically turns on/off.Charge in sunlight,An epoxy can be applied to back-nut to prevent theft.
Solar Panel Lights,Solar Panel Street Light,Garden Motion Lights,Automatic Solar Lights HEBEI ZIFENG NEW ENERGY TECHNOLOGY CO.,LTD. , https://www.zifengpipeline.com
