The electric control system automatic tensioning system is equipped with a dedicated electric control box. The panel of the electric control device is equipped with a tightening force meter and LED indicator lights to reflect the operation of the equipment to the operator in real time to understand the operation status of the equipment; Various transfer switches and control buttons; the electric control device is equipped with PLC, intermediate relay and contactor to complete the control of the automatic tensioning device. Among them, PLC is the core of the control. In addition to outputting a set of normally open contacts of the control oil pump, the control system also has normally open contacts for normal tension and broken belt output. When the tension is abnormal or the belt is broken, the output contact is closed and sent to the PLC to monitor the normal operation of the entire system. The main functions of each electrical component are as follows: (1) PLC: It is the control core of the system, completes information collection and processing, and outputs corresponding control instructions; (2) Intermediate relay: used to complete the output of various control logic results and play a role in signal isolation; (3) Cologne mass flowmeter of contactor: used to complete the start and stop control of the tensioning hydraulic pump motor and the forward and reverse control of the tensioning winch motor; (4) Operation mode selection: The transfer switch has two optional positions, namely debugging and working. When it is in the debugging position, you can use the start and stop buttons on the panel to experiment and debug the hydraulic automatic tensioning device. At this time, it is offline with the central control system; when it is in the working position, the central control The system must send a remote permission signal before the hydraulic automatic tensioning device enters the automatic working state; (5) Tightening winch control switch: This switch is used to control the forward or reverse rotation of the winch motor. Therefore, the hydraulic automatic tensioning device can adjust the tension of the conveyor belt according to the different needs of the tension at the start and the tension during normal operation, and the response is fast. The conveyor belt can be set and adjusted according to the changes in the working environment The required tensioning force makes the belt conveyor more stable and reliable when starting. In addition, the device saves energy consumption and extends the life of the conveyor belt, and its economic benefits are significant.
Introduction
SCOTECH manufactures a full
range of three phase distribution transformers, they can be oil immersed or
dry type, equipped with or without oil conservator, hermetically sealed or free
breathing, with corrugated tank or equipped with radiators. The three phase
Distribution Transformer are widely used in power system.
Scope of supply
Primary
voltage up to 35KV
Rated
power: small size up to 315KVA, medium size up to 2500KVA, large size up to
25MVA
Installation:
free standing, pole mounted, pad mounted type
Standards
SCOTECH`s
three phase distribution transformers are designed and manufactured in
accordance with all major international standards (IEC, ANSI, UL, etc.)
Why SCOTECH
Long
history- Focus on transformer manufacturing since 1934.
Technical
support – 134 engineers stand by for you 24/7.
Manufacturing-advanced
production and testing equipment, strict QA system.
Perfect
service-The complete customer service package (from quotation to energization).
Three Phase Distribution Transformer 3 Phase Transformer,Three Phase Transformer,Three Phase Distribution Transformer,Three Phase Pole Mounted Transformer Jiangshan Scotech Electrical Co.,Ltd , https://www.scotech.com