For Iphone:
Compabile Models:
Guangzhou HangDeng Tech Co. Ltd , https://www.hangdengtech.com
For Iphone8/X/XR/XS Max
For Samsung:
For Galaxy S6, For Galaxy S6 Edge, For Galaxy S6 Edge+,
For Galaxy S6 Active, For Galaxy S6 Duos, For Galaxy Note Edge,
For Galaxy S7, For Galaxy S7 Edge, For Galaxy Note 5
For Galaxy S8, For Galaxy S8 Plus, For Galaxy Note 8
For Galaxy S9,For Galaxy S9 Plus
For Sony:
For Xperia Z4V, For Xperia Z3V
For Google:
For Nexus 4, For Nexus 5, For Nexus 6, For Nexus 7
For MOTORALA:
For Moto Droid Turbo, For Moto Droid Turbo 2, For Moto Droid 5
For NOKIA:
For Lumia 920, For Lumia 928, For Nokia Lumia 93, For Lumia 950, For Lumia 950 XL, For Lumia 1020, For Nokia Lumia 1050, For Nokia Lumia 822, For Nokia Lumia 735
For HTC:
For HTC ONE MAX T6, For HTC Incredible 4G, For HTC ONE mini 2, For HTC Droid DNA
For LG:
For LG Nexus 4, For LG Nexus 5, For LG G Pro, For LG D1L, For LG LTE2
For Others:
For YotaPhone 2, For Elephone P9000
PPTV-50P & music as X3-50 comparison evaluation
PPTV-50P & music as X3-50 comparison evaluation
table of Contents
Part I: Comparison of Structural Parameters
Part II: Comparison of Product Appearance
Part III: Internal Comparison of Products
Part IV: Technical Comparison
Part I: Comparison of Structural Parameters
PPTV-50P LetvX3-50 bare metal weight 23.9Kg 12.5Kg with base weight 24.6Kg 15.0Kg bare metal size L 1122 H 663 W 249 L 1117.4 H 644 W 41.9 with base size L 1122 H 707 W 249 L 111.7 H 727.9 W 216.6
Part II: Comparison of Product Appearance
frame
PPTV-50P
LetvX3-50
on
13.5
6.9
about
13.5
6.9
under
21.6
13.5
PPTV-50P LetvX3-50 Description Backplane material is SGCC, surface sandblasted paint, PCB plastic backshell material is PC+ABS, injection molding, the whole can be divided into three parts, divided into three parts can save mold costs, but also reduce Scrap rate, the shape is very common, processing is relatively simple, the key board on the plastic back cover adopts the sticking method, the operation is simple and the cost is saved. The LCM backplane is made of aluminum. The surface is dusted. The back cover of the PCB is made of PC+ABS. Injection molding is used. The whole is a full back cover. In order to pursue styling without any cost, the whole machine has no extra keys and only one power switch. Concise, no extra space.
PPTV-50P back detail
PPTV-50P back detail
PPTV-50P LetvX3-50 Description The material of the front frame is aluminum, the processing technology is aluminum extrusion, the bent part adopts the most common seam bending, the following deco material is also aluminum, the processing technology is also aluminum extrusion, front frame and Deco's gap is large. At first glance, it looks very rough. Although screws on the back are countersunk, there are no nuts on the front frame. The screws do not sink, and the workmanship is not refined. There is no pursuit of ultimate spirit. The front frame is aluminum extrusion, no four corners are used for seamless bending, and the latter process is sandblasting anode: Deco is aluminum extrusion, and the subsequent process is sandblasting anode; the back screw surface is level with the outer surface of the product.
PPTV-50P LetvX3-50 describes a first-order thickness of 13.2mm and a second-order thickness of 42.3mm. Although the first-order thickness is relatively thin, the first-order and second-order transitions are not very smooth and the transition is relatively rigid. It is not sleek and does not have an integrated feeling. The first-order thickness is 13.9mm, and the second-order thickness is 41.9mm.
Part III: Internal Comparison of Products
PPTV-50P alignment diagram
Internal alignment is chaotic, and it is not standardized at all. The four wall-mounted support columns are very tall and beyond the rear cover. It looks ugly. Many of the structural parts used inside are aluminum extrusion or sheet metal stamping. The custom parts are very Less, cost savings.
Letv X3-50 alignment diagram
The layout of the internal routing is reasonable, the use of custom parts is simple, and the right-angle layout is used.
PPTV-50P alignment diagram
PPTV-50P alignment diagram
PPTV-50P alignment diagram
Part IV: Technical Comparison
PPTV-50P this machine is characterized by cost savings, the general quality of the product, the overall look very casual, not on the grade.
The cost and quality aspects are summarized from the following points:
1, the whole shell backplane and LCM backplane share, and only a board, this is why the body is so thin.
2. The LCM backboard is only reinforced with the following two aluminum bars. There are no convex ribs on the top. The strength must not be compared with our backplane. The surface is only sandblasted. No beauty. However, considering cost considerations is a clever way.
3. The bending of the front frame is ordinary seam bending, the process is very simple, the ordinary small factory can be processed, the locking screw nut does not sink, looks very rough. The gap between the Deco section and the front frame is large and the workmanship is rather rough, and there is no pursuit of ultimate spirit.
4. Many components inside the rear shell are extruded in aluminum, including two aluminum ribs, support leg fixtures, and the LCM part of the middle frame. This saves a lot of tooling costs and saves a lot of costs, which is also a low price. the reason.
5. The ordinary plastic herringbone leg used for the support leg, but the surface is made of a plating, no sense of innovation. However, from the cost point of view, the higher cost performance, simple and elegant modeling, installation is also more convenient and stable, consistent with this price.
6, to strengthen the aluminum extrusion process using aluminum extrusion, clever use of grooves instead of open threaded hole, so you can avoid secondary processing, saving costs.
7. The height of the four wall-mounted support posts on the back is obviously higher than that of the back shell of the plastic. The whole picture is not very harmonious.
8. The plastic back panel adopts a segmented structure, which can be divided into three parts. The middle part is connected with screws, which saves the cost and reduces the scrap rate. This point is worth learning, but from the aspect of appearance, the shape is ordinary, there is nothing special, there is no artistic beauty, see only the blunt edges and transitions.
9, the key part of the use of adhesive, simple operation, but the later maintenance is more trouble. This has both advantages and disadvantages.
Summary: By dismantling, we can put both data and objects on the front surface so that consumers can clearly see the external beauty and internal beauty of TV.