No. Subpackage name Bidder’s financial, qualification and performance requirements 1 Polyferric chloride (PFC) 1. The registered capital of the manufacturer's legal person is 200,000 yuan and above; if the only designated agent bids, the registered capital is 100,000 yuan and above. 2. Bidding by manufacturers or agents must have two or more polyferric chloride supply performances from 2014 to the present and provide a copy of the contract. 1.2.13 The bidder did not exist in the evaluation period of the project and was listed as the untrustworthy executor. The specific determination was based on the national court's untrustworthy executive list information disclosure and inquiry network (shixin.court.gov.cn) and national development reform. Committee Credit China () website search results prevail. No. Equipment name and specifications Quantity Tender Document Price (yuan) Delivery date Tender number Bid deposit (yuan or percentage) mentPrice_8320">1 Polyferric chloride (PFC) 2936 tons 1200 yuan 2017.1.1-2017.12.31 GDCX03-FJZB16-0805/01 15,000 yuan 1.10 Deadline of Bid Document: The deadline for submitting electronic bid documents submitted by the bidder for the first step is 16:00 (Beijing time) on December 06, 2016. Overdue or non-compliant tender documents are not accepted. Contact: Zhang Jie Mobile: phone fax E-mail: In order to ensure that you can bid smoothly, please consult the bidding agency or the tenderer for detailed requirements for bidding before bidding or purchasing the bidding documents. The specific requirements and project conditions shall be interpreted by the bidding agency or the tenderee. Biopsy Instrument,Biopsy Punch,Biopsy Forceps,Cervical Biopsy Forceps Dragon Crown Medical Co., Ltd. , https://www.dragoncrownmed.com
Tender code: CBL_20161116_188923618
Bulletin category: Domestic tender
Tenderee: Guodian Yinhe Water Co., Ltd. Source of funds: Other Chapter I Tender Announcement Project Name: Guodian Yinhe Water Co., Ltd.'s affiliated company produces polyferric chloride (PFC) pharmaceuticals (hereinafter referred to as "project").
Tender No.: GDCX03-FJZB16-0805 (01-01)
Date: November 16, 2016
1.1 Invited by Guodian Yinhe Water Co., Ltd. (hereinafter referred to as “the tendereeâ€) to use the domestic public tendering method (one-step system, online bid opening) to invite the subject matter manufacturing company or designated sole agent meeting the requirements of the bidding documents (below The "Bidder" for short) submits sealed competitive bidding documents for the supply and service of this bidding project.
1.2 The basic requirements for eligible bidders are as follows:
1.2.1 The Bidder shall conduct CA (certificate authority) registration before the electronic bid-buying. When registering, the bidder shall provide a color scan of the company's business license, organization code certificate, tax registration certificate, and bank basic account opening permit.
1.2.2 The Bidder shall be an independent, legally registered manufacturer of the Bid Manufacturing Enterprise or a designated sole agent and have the ability to perform civil liability within its legal business scope.
1.2.2.1 The proxied manufacturer can only entrust an agent to bid for the same brand of goods of the same brand. The manufacturer shall not bid separately or participate in the consortium bid;
1.2.2.2 If the bidder is the sole designated agent, the manufacturer must provide the agent with the sole sales agent authorization letter. The authorization letter must include the performance, quality and delivery date of the item guaranteed to the bidder for this item. The Tenderee undertakes to assume the joint and several liability for the performance, quality and delivery date of the subject matter. The manufacturer must meet all the requirements of the qualified manufacturer in 1.2.12.
1.2.2.3 If the bidder is a manufacturer's sales company, it must have independent legal personality and perform civil liability. Only one of the manufacturers and their sales companies can participate in the bidding. At this time, the sales company is the only designated agent, and submits bid documents according to the regulations for the only designated agent.
1.2.3 The Bidder shall not directly or indirectly cooperate with the Tenderee or any company he hired or has hired to prepare technical specifications and other documents or provide consulting services for this Tender, including its subsidiaries or the electronic bidding system platform. Any association.
1.2.4 Bidder The person in charge of the unit is the same person or a different unit that has a controlling or managing relationship and may not participate in the bidding for the same subject at the same time.
1.2.5 The bidder has qualifications and capabilities in design, manufacturing, quality control, and operation management in terms of professional technology, processing equipment, personnel organization, performance experience, and financial resources.
1.2.7 The bidder must meet the performance and quality requirements specified in the bidding documents and must provide the performance guarantee value of the subject matter and/or technical documentation (if any) with asterisk (“☆â€) technical parameters (including However, it is not limited to the type test reports and/or qualification reports and/or performance acceptance test reports of the target, etc., and it meets the requirements of advanced technology, maturity, safety, reliability, environmental protection, and complete supply.
1.2.8 The bidder shall substantially respond to the terms of the contract and the delivery date specified in the bidding documents.
1.2.9 Subjects and key parts of the subject matter shall not be subcontracted or transferred without the written consent of the tenderer. The bidder’s subcontractors (except for low-priced widgets) shall be confirmed by the jury for the same number of passes and the same Technical level and quality standards subcontractors.
1.2.10 Bidders must have good financial status, bank credit, and business reputation. They are not being ordered to suspend business, assets are taken over, frozen, bankrupted, and reorganized.
1.2.11 The bidder and its subcontractors have not terminated the contract in any contract or have been the tenderer and its subcontractors within the last 5 years. They must not be terminated within the penalty period, and must not be in compliance with the proposed bid. Similar major quality and safety accidents. The bidder has not been corrupted or fraudulently defined by China's national authorities or has violated the provisions of 1.2.10 in the bid and bad commercial reputation behavior in the performance in the past three years.
1.2.12 Finance and performance must satisfy the requirements in the following table (if the performance requirements are not consistent with other parts of the bidding documents, this article shall prevail).
1.2.14 Other conditions stipulated in the bidding documents.
1.3 The Commonwealth does not accept bids for this consortium.
1.4 The scope of the tender is the supply and service of the tendering project (hereinafter referred to as the subject matter). It also includes all necessary materials, spare parts, special tools, consumables, design, training, factory inspection, commissioning, installation and trial operation. Guidance and other technical services (hereinafter referred to as "services"), etc. For details, see the relevant provisions of the second volume of the bidding documents.
1.5 The potential bidder must be entitled to participate in competitive bidding after obtaining bid documents from the bidding agency in his own name. The bid inviter and the bid invitation agency refused to accept the bid from the bidder who did not purchase the bidding documents. The bidder’s bid obtained by the bidder is copyrighted by the tenderer and the bidding agency and is for the purpose of this tender only.
1.6 Time for selling tender documents: From November 16th, 2016, from 09:00 to November 22, 2016, 16:00 (Beijing time).
1.7 Potential bidders wishing to purchase tender documents, (.)
1.8 Selling Bidding Documents:
The tender documents are purchased using the online payment model (wireless transfer, online banking transfer, on-site cash payment and other purchase methods are not accepted). The system also supports corporate online banking payment and personal online banking payment.
1.8.1 If purchased through a company account, corporate accounts must have online banking capabilities. When online payment is made, this website will be redirected (linked) to the bank website selected by the purchaser.
1.8.2 If purchased through a personal account, it will be considered that the purchaser has obtained authorization from the company and is equivalent to the purchase of the company. Before you purchase, verify that the online payment limit of your bank card is not less than the selling price of the bidding documents, so as not to affect the purchase of the bidding documents.
1.8.3 The bidder must be the bidder. The basic information such as bidder's name, correspondence address, contact person, and contact information that the potential bidder fills in on the platform must be accurate, and the information on the whole process of tendering and bidding should be issued and contacted.
1.8.4 After successful payment, bidders directly download the electronic version of the bidding documents from the Internet. The tenderer/bidding agency does not provide any paper tender documents. Successful payment means that the tender documents have been sold. Except for the reasons of the tenderer or the bidding agency, the tender documents will not be refunded once sold.
1.8.5 The bidding agency will mail the commercial invoice for the bidding documents to potential bidders as soon as possible according to the mailing address filled in when purchasing the bidding documents.
1.8.6 Failure to purchase the bidding documents or other issues, please contact customer service center.
1.9 Tender Equipment List and Bidding Documents Price:
1.12 Time and place of bid opening: The bid opening time for the first bid opening will be at 16:00 on December 06, 2016.
Patent Announcement for the Production of Polymeric Ferric Chloride (PFC) Pharmacy by the Project Company affiliated to Guodian Yinhe Water Co., Ltd.
The tender number: GDCX03-FJZB16-0805