Opencast Coal Industry Shanghai Temple to Shandong UHV Channel Bring Alashan Wind Power Project Wind Turbine (including wind measurement equipment procurement and installation general contracting and Etuoke flag new energy base project planning report compilation and wind measurement, photometric equipment procurement Installation of general contracting project tender notice The tender number: DXGSZBGG-2018-024-01 4.2 How to purchase /p> Contact: Chen Yumin Cell phone phone mailbox: Keystone Jack,cat6 keystone,cat6 jack,cat6 wall jack NINGBO UONICORE ELECTRONICS CO., LTD , https://www.uonicore.com
Tenderee: National Power Investment Group Inner Mongolia Energy Co., Ltd.
The Tenderer National Power Investment Group Inner Mongolia Energy Co., Ltd. entrusted Tongliao Mengdong Energy Dingxin Bidding Co., Ltd. to propose to send the Alxashan wind power project wind tower (including wind measurement equipment) to the open-pit coal industry from Shanghai Temple to Shandong UHV Passage. The procurement and installation general contracting and the Etuokeqi new energy base project planning report preparation and the wind contraction, photometric equipment procurement and installation general contracting project organization are openly invited domestically. Potential bidders who meet the qualification requirements are invited to participate in the bidding.
1. Basic Information of the Project Tenderee: National Power Investment Group Inner Mongolia Energy Co., Ltd. Project Unit: See the scope of the bid for the bid invitation agency: Tongliao Mengdong Energy Dingxin Bidding Co., Ltd.
2. Bidding scope No. Item Unit Bidding Document No. Bidding Name Bidding Main Content Purchase Bidding Document Cost (yuan)
1 Inner Mongolia Huolinhe Open-pit Coal Industry Co., Ltd. DXGSZBWJ-2018-024-01 Inner Mongolia Huolinhe Open-pit Coal Industry Co., Ltd. Shanghai Miaozhi Shandong UHV Channel Bringing Alashan wind power project wind towers (including wind measurement equipment procurement The main contents of the installation and general contracting project are: design, manufacture, transportation, transportation, secondary handling, foundation construction, installation, lightning protection grounding, construction restoration, land acquisition compensation and coordination, and wind measurement for five 150-meter-high wind measuring towers. The owner of the equipment procurement, installation and commissioning received all the work before the wind measurement data sent by all the wind towers, and the data transmission and management of the wind data within three years after the owner received all the measured wind data sent by the wind tower. , After-sales service and installation instructions for wind measuring towers and wind measuring equipment, explanations of maintenance records, etc., and compilation of wind resource analysis reports.
2 DXGSZBWJ-2018-024-02 Etuokeqi new energy base project planning report preparation and wind measurement and photometric equipment procurement and installation general contracting project Preparation of the proposed project planning report. Design, production, transportation, transportation, secondary handling, foundation construction, installation, lightning protection grounding, construction restoration, compensation for land acquisition of a 150-meter-high, three 120-meter-high wind measuring tower and a metering tower in the proposed area And coordinating, procurement, installation and commissioning of wind measurement and photometric equipment, etc., and all operations before the owner received all data normally sent by wind measurement and metering towers, and after the owner has received all the data normally sent by the wind measurement and metering towers. Delivery and management of data within three years, post-sales service and installation instructions for wind measurement, metering towers and wind measurement equipment, installation instructions, maintenance records, etc.; analysis report of wind and light resources; evaluation of overall wind and light resources of the project Reports were compiled; project wind and light resources review reports were compiled.
Note: The specific work content and scope are based on the bidding documents.
3. The qualifications of the bidders require that the tenders be qualified after the trial. The potential bidders can voluntarily participate in the bid based on the following conditions.
No. Bidding Document No. Bid Name Bidder Qualification Requirements
1 DXGSZBWJ-2018-019-01 Inner Mongolia Huolinhe Open-Coal Coal Co., Ltd. Shanghai Miaozhi Shandong UHV Channel Bringing Alxashan Wind Power Project Wind Turbine (Including Wind Equipping Equipment Purchase and Installation General Contracting Project (A Basic Qualification Requirement)
1. The bidder shall be a registered company in China with independent legal person qualification and be qualified for annual review by the administrative department for industry and commerce. Has a perfect quality assurance system and passed certification.
2. In the last three years, no bad behavior such as fraudulent bid winning and serious breach of contract has occurred.
3. Not being ordered to suspend business, property was taken over, frozen, and bankrupted.
4. With good bank credit and business reputation, operating conditions are good.
5. There is no real or potential conflict of interest between the bidder and the bidder.
6. Two or more companies whose legal representative is the same person (company; parent company, wholly-owned subsidiary and its holding company; two or more companies that have a direct or indirect holding relationship with each other; (Corporate. One of the aforementioned cases can only be done by one of the companies (the company applies for a bid.
(Second special qualification requirements
1. Have Grade A qualification for integrated power engineering survey and design or Grade 2 or above qualification for general contracting for power construction
2. In the last three years, there should be 3 project achievements of the wind tower construction project, and the performance of the wind turbine tower design, procurement and construction general contracting project of 100 meters and above (provide proof of performance.
3. There shall be no artificially significant liability accidents recorded in accordance with the relevant laws and regulations within the past two years.
4. This project does not accept any consortium bid.
2 DXGSZBWJ-2018-019-02 Etuokeqi New Energy Base Project Planning Report Compilation and General Contracting Project for Wind Measurement and Metering Equipment Purchase and Installation (I) Basic Qualification Requirements
1. The bidder shall be a registered company in China with independent legal person qualification and be qualified for annual review by the administrative department for industry and commerce. Has a perfect quality assurance system and passed certification.
2. In the last three years, no bad behavior such as fraudulent bid winning and serious breach of contract has occurred.
3. Not being ordered to suspend business, property was taken over, frozen, and bankrupted.
4. With good bank credit and business reputation, operating conditions are good.
5. There is no real or potential conflict of interest between the bidder and the bidder.
6. Two or more companies whose legal representative is the same person (company; parent company, wholly-owned subsidiary and its holding company; two or more companies that have a direct or indirect holding relationship with each other; (Corporate. One of the aforementioned cases can only be done by one of the companies (the company applies for a bid.
(Second special qualification requirements
1. Have Class A or Power Engineering Design Grade A or Engineering Design Grade A qualification or Power Construction General Contracting Grade 2 and above qualifications.
2. There should be three PV power generation designs with 50MW or above or 20MWp and above in the past three years.
3. In the past three years, there should be 3 project performances for the wind measurement or metering tower assembly projects, and 1 performance of a wind turbine tower construction contracting project of 100 meters or more (provide proof of performance.
4. There shall be no artificially significant liability accidents recorded in accordance with relevant laws and regulations within the past two years.
5. This project does not accept any consortium bid.
4. Sale and Purchase of Bidding Documents If you are interested in participating in bidding, please contact the bidding agency to purchase the tender documents according to the following information and requirements.
4.1 Get time
4.1.1 Time: April 20th to April 24th, 2018.
8:30AM to 11:30AM, 13:30PM to 16:30PM
4.2.1 Telegraphic Transfer Purchase Method During the above-mentioned release period, the amount of the purchase bidding document will be remitted to our designated remittance account number. After remittance, please email the following information to us as soon as possible:
(1 copy of business license;
(2 copies of the authorized person's authorization letter;
(3 copies of authorized person's ID card;
(4 bank transfer receipt copy;
(5 Information about the purchase of tender documents: (Editable version of the bidder's name
Note
After receiving the email, we will email the electronic version of the bidding document to the email address provided by the bidder's purchaser.
4.3 Purchase of Bidding Documents Contacts and Contact Information
5 Submitting bid documents
5.1 Deadline for submission of bid documents: Further notice.
5.2 Place of submission of tender documents: Further notice.
5.3 Overdue or non-delivery of tender documents at designated locations, the tender will not be accepted.
6. Cut/open time,
6.1 Bid Opening Time: Further Notice.
6.2 Place of Bid Opening: Further notice.
In order to ensure that you can bid smoothly, please consult the bidding agency or the tenderer for detailed requirements for bidding before bidding or purchasing the bidding documents. The specific requirements and project conditions shall be interpreted by the bidding agency or the tenderer.